Conductors:
Annealed flexible stranded tin coated copper in accordance with ASTM B 172 and ICEA S-75-381.
Conductor Shielding:
Semi-conducting layer over the conductor.
Insulation:
Ethylene-propylene rubber (EPR).
Insulation Shield:
Non conducting bedding tape + composite tinned copper/fiber braid. Covering minimum 60%.
Circuit Identification:
The nylon in the shielding braid is colored black, white, red in accordance with ICEA S-75-381.
Grounding Conductors:
Annealed tin coated copper as per Tab. 3-21 of ICEA S-75-381.
Ground Check:
Annealed tin coated copper as per Tab. 3-21 of ICEA S-75-381.
Color of insulation:
yellow.
Assembly:
Three power, ground check and two noninsulated grounding conductors cabled together. Single faced rubber filled binder tape applied overall. Integral filled jacket for higher torsion resistance.
Jacket:
A reinforced NEOPRENE, CPE, TPU optional jacket available. Type extra heavy duty in accordance with Par. 3.21 of ICEA S-75- 3581.
Color of Jacket:
Black, other colors available upon request.
Shielded, Medium, Voltage, High ampacity, Flexible Submersible Pump Cable designed for use as heavy duty deep well fresh or salt water suitable for continuous submersion to 984’. Dual rated submersible and SHD-GC. Impact, abrasion, Ozone, Sun, Water, Heat, Oil, and Flame resistant.
Paige has earned ISO 9001:2015 certification for its factories in Columbus, NE and Silao, Mexico. We are dedicated to ensuring customer satisfaction and continual improvement, while embracing sustainability practices.
