Scroll To Top

FLAT Hydrohide SUBMERSIBLE PUMPWIRE 2 & 3 CONDUCTOR WITH GROUND – P7271M-SP

Home   »   FLAT Hydrohide SUBMERSIBLE PUMPWIRE 2 & 3 CONDUCTOR WITH GROUND – P7271M-SP   »   FLAT Hydrohide SUBMERSIBLE PUMPWIRE 2 & 3 CONDUCTOR WITH GROUND – P7271M-SP
Ground THHN/PVC Flat Submersible PumpWire

FLAT Hydrohide SUBMERSIBLE PUMPWIRE 2 & 3 CONDUCTOR WITH GROUND – P7271M-SP

Voltage

600/2000 VOLTS

Insulation

POLYVINYL CHLORIDE AND NYLON

Sizes

12 - 500 MCM

Jacket

POLYVINYL CHLORIDE

Temp Dry/Wet

90°C Dry, 75°C Wet

Share it

FLAT SUBMERSIBLE
2 & 3
CONDUCTOR WITH GROUND

Heavy duty (double jacketed), Flat Submersible pump cable suitable for use within well casings for wiring deep well fresh or salt water submersible pumps.

Conductors:

Class C, soft drawn, bare copper per ASTM B3 and ASTM B8.

Insulation:

Heat and moisture resistant, polyvinyl chloride meeting the requirements of UL 83 for Type THHN and THWN wires. The insulation is acceptable for use in locations at 90°C dry or 75°C wet. The insulation thickness is in accordance with UL 83.

Conductor Jacket:

A nylon jacket is applied directly to the surface of the PVC insulation. Nylon shall meet the requirements of UL 83. The thickness is in accordance with UL 83.

Ground Conductor:

Class C, soft drawn, bare copper per ASTM B3 and ASTM B8. The conductor is insulated with PVC/Nylon and the nominal overall diameter shall equal the insulated circuit conductors.

Assembly:

The insulated circuit and grounding conductors are laid flat and parallel together. The jacket will be applied directly over the insulated conductors encapsulating them.

Jacket:

Heat and moisture resistant, Black polyvinyl chloride meeting the requirements of UL 83. The thickness is in accordance with UL 83.

Color Code:

Black, yellow, red & green grounding conductor. Surface Marking: The overall jacket will have the following information printed: PAIGE SUBMERSIBLE PUMP CABLE NUMBER AND “size of conductors”, TYPE THHN/THWN 600 V (UL).

Approvals:

UL: E63611-T

MSHA: P-7K-206644