Scroll To Top

FLAT HYDROFLEX SUBMERSIBLE PUMPWIRE 3 CONDUCTOR WITH OF WITHOUT GROUND – P7326M-SP

Home   »   FLAT HYDROFLEX SUBMERSIBLE PUMPWIRE 3 CONDUCTOR WITH OF WITHOUT GROUND – P7326M-SP   »   FLAT HYDROFLEX SUBMERSIBLE PUMPWIRE 3 CONDUCTOR WITH OF WITHOUT GROUND – P7326M-SP

FLAT HYDROFLEX SUBMERSIBLE PUMPWIRE 3 CONDUCTOR WITH OF WITHOUT GROUND – P7326M-SP

Voltage

600/2000 VOLTS

Insulation

(EPR) ETHYLENE PROPYLENE RUBBER

Sizes

4 - 500MCM

Jacket

(CPE) CHLORINATED POLYETHYLENE RUBBER

Temp Dry/Wet

90°C Dry, 90°C Wet, Min. ambient temp. -40°C

Share it

FLAT SUBMERSIBLE
EXTRA FLEXIBLE
HYDROFLEX
3 CONDUCTOR WITH OR WITHOUT GROUND

Extra Flexible, high ampacity, Flat Rubber Submersible Pump Cable for use within well casings for wiring deep-well submersible water pumps, mining applications. Hydroflex is especially efficient for use in municipal applications, cold weather, flame retardant and high ampacity requirements.

Conductors:

Soft Bare, annealed copper per ASTM B-3 and ASTMB-172 Flexible, Rope-lay-stranded.

Insulation:

Ethylene-propylene rubber (EPR) as per clause 7.2.4 of UL 44 plus faced rubber filled binder tape. The insulation is acceptable for use in locations at 90°C.

Ground Conductor:

Soft Bare, annealed copper per ASTMB-3 and ASTMB-172 Flexible Rope-lay-stranded. Insulation EPR 90°C and the nominal overall diameter shall equal the insulated circuit conductors.

Assembly:

The insulated circuit and grounding conductors are laid flat and parallel together. The jacket will be applied directly over the insulated conductors encapsulating them.

Jacket:

Black Extra Heavy Duty thermosetting 90°C rated chlorinated polyethylene rubber (CPE) which meets requirements of Par. 3.21 if ICEA S-75-381 and clause 7.2.6 of UL 44. Neoprene optional jacket available.

Color Code:

Black, yellow, red & green with yellow stripe grounding conductor. Surface Marking: The overall jacket (CPE) will have the following information printed: PAIGE ELECTRIC HYDROFLEX SUBMERSIBLE PUMP CABLE NUMBER AND SIZE (AWG) of conductors, EPR/CPE 6–/2000V 90°C (UL)

Approvals:

MSHA: P-07-KA060001-MSHA

UL: E193954