Scroll To Top

600V SP lead cable – P7254-SP

Home   »   600V SP lead cable – P7254-SP   »   600V SP lead cable – P7254-SP
600 Volt 4/C 14 AWG EPR/Nitrile paigepumpwire

600V SP lead cable – P7254-SP

Voltage

600V

Insulation

EPR - Ethylene Propylene Rubber

Sizes

14 AWG

Jacket

Nitrile

Share it
Approvals

600 Volt 4/C 14 AWG EPR/Nitrile Submersible Pump Cable

Rubber motor lead cable meets US standards with three parallel conductors and a ground  separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Red nitrile jacket.

Rubber motor lead cable meets US standards with three parallel conductors and a ground separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Red nitrile jacket.

Conductors:

  •  Size/Stranding: 14 AWG (7/.0242″)
  •  Material: Coated Copper
  •  Stranding Class: “B”
  •  Separator: Paper
  •  Applicable Spec: ASTM B-8

Insulation:

  • Material: EPR or Hypalon
  • Wall Thickness: .030″ Minimum Average, in Accordance with UL Standard 44
  • O.D. .140″
  • Temperature Rating: 90°C
  • Applicable Spec: ICEA S-68-516
  • Color Code: Method – Pigmented Compounds: Green, Red, Yellow, Black

Assembly : The four conductors are laid parallel as shown in the drawing

Jacket:

  • Material: Red Nitrile
  • Wall Thickness: .015 Minimum at any Point, in Accordance with UL Standard 44
  • Max O.D.: .245″ x .705″
  • Surface Print: Size, Voltage, Submersible Pump Cable

Ratings: UL LISTED