FLAT SUBMERSIBLE HYDROFLEX
600 VOLT NO GROUND PUMP CABLE
EPR/BLUE-NBR/PVC/TUF-HIDE
Conductors: Extra-flexible stranded uncoated annealed copper conforming to ASTM B-3 and B-174 or 173. A suitable separator tape shall be applied over the conductor.
Insulation: Ethylene Propylene Rubber conforming to ICEA S-68-516, Part 3.6 and UL Class 45.
Color Code: Insulation colored Black, Yellow, and Red.
Cable Assembly: The three insulated conductors are laid parallel in the sequence Black, Yellow, Red.
Inner Jacket: Heavy duty blue thermosetting NBR/PVC (Nitrile) rubber conforming to UL 1581, Table 50.87. The jacket shall be extruded so as to fill the valleys between the insulated conductors.
Markings: The inner jacket surface shall be printed ith white ink as follows:
“PAIGE ELECTRIC (SIZE) AWG NO. OF/COND. HYDRO-FLEX SUBMERSIBLE PUMP CABLE 00V. 90C DRY 75C WET E 18966 (UL)”
Other information may be provided when specifically requested.
Outer Jacket: A clear, abrasion resistant Paige “Tuf-Hide” jacket shall be extruded over the inner
NBR/PVC jacket.
Flat submersible pump cables for use within the well casing for deep-well water pumps, off-shore applications where flexible cut resistant properties are required. Cable is integral filled to eliminate gas
wicking possibilities.
Paige has earned ISO 9001:2015 certification for its factories in Columbus, NE and Silao, Mexico. We are dedicated to ensuring customer satisfaction and continual improvement, while embracing sustainability practices.
