Scroll To Top

600V armored SP cable – P7307-SP

Home   »   600V armored SP cable – P7307-SP   »   600V armored SP cable – P7307-SP

600V armored SP cable – P7307-SP

Voltage

600V

Insulation

XLPE - Cross-Linked Polyethlene

Sizes

14 - 750 MCM

Jacket

PVC - Polyvinyl Chloride

Temp Dry/Wet

90°C Dry, 90°C Wet

Share it
Approvals

SUBMERSIBLE PUMP ROUND INTERLOCKED ARMOR CABLE
600 VOLT UL TYPE MC
3 OR 4 CONDUCTORS with Ground XLPE/AIA/PVC

Designed for use as a power cable where maximum protection is required. Direct burial rated and UL listed well locations. Type MC. Good for use as a submersible cable.

Conductors: 3 or 4 Class B stranded copper

Insulation: Heat and moisture resistant crosslinked polyethylene (type XHHW-2), phase identified.

Fillers: When needed.

Ground: 1 bare copper ground for 3 conductor 2 bare copper grounds for 4 conductor

Armor: Core covered with binder tape, aluminum or galvanized steel interlocked armor.

Jacket: Flame and sunlight resistant black PVC jacket. (Jacket available under armor and in other colors.)

Color Code: K-2/other color codes available.

Temperature: 90˚C Wet/Dry Per ICEA S-66-534/NEMA WC-7

Cable Reinforcement: An open reinforcement is applied over the assembly for mechanical protection.

All cables shall be tested physically and electrically in accordance with UL and IEEE-383 flame test with additional 210,000 BTU rating. All reels and cartons bear UL labels. CT use-UL approved; UL 1569.

  • Conforms to ICEA S-95-658/NEMA WC70 Nonshielded 0-2KV Cables.
  • Conductors conform to UL 44 Thermoset-Insulated Wires and Cables.
  • Listed by UL as Type MC per Standard UL 1569.
  • Listed by UL as Sunlight Resistant, for Direct Burial, and for CT use.