3/C with Ground EPR/CPE, Flexible Power  Submersible Pump Cable FLAT SUBMERSIBLE PUMP CABLE EXTRA FLEXIBLE HYDROFLEX 600/2000 VOLTS 3 CONDUCTOR WITH OR WITHOUT GROUND

Conductors: Soft Bare, annealed copper per ASTM B-3 and ASTMB-172 Flexible, Rope-lay-stranded. Insulation: Ethylene-propylene rubber (EPR) as per clause 7.2.4 of UL 44 plus faced rubber filled binder tape. The insulation is acceptable for use in locations at 90°C. Ground Conductor: Soft Bare, annealed copper per ASTMB-3 and ASTMB-172 Flexible Rope-lay-stranded. Insulation EPR 90°C and the nominal overall diameter shall equal the insulated circuit conductors. Assembly: The insulated circuit and grounding conductors are laid flat and parallel together. The jacket will be applied directly over the insulated conductors encapsulating them. Jacket: Black Extra Heavy Duty thermosetting 90°C rated chlorinated polyethylene rubber (CPE) which meets requirements of Par. 3.21 if ICEA S-75-381 and clause 7.2.6 of UL 44. Neoprene optional jacket available. Color Code: Black, yellow, red & green with yellow stripe grounding conductor. Surface Marking: The overall jacket (CPE) will have the following information printed: PAIGE ELECTRIC HYDROFLEX SUBMERSIBLE PUMP CABLE NUMBER AND SIZE (AWG) of conductors, EPR/CPE 6--/2000V 90°C (UL) Approvals: MSHA: P-07-KA060001-MSHA UL: E193954

Extra Flexible, high ampacity, Flat Rubber Submersible Pump Cable for use within well casings for wiring deep-well submersible water pumps, mining applications. Hydroflex is especially efficient for use in municipal applications, cold weather, flame retardant and high ampacity requirements.

Download File 'P7326-SP'

No FAQs available at this time.