Scroll To Top

600V/1000V flexible multi-conductor power cable type P – P7279TP-SP

Home   »   600V/1000V flexible multi-conductor power cable type P – P7279TP-SP   »   600V/1000V flexible multi-conductor power cable type P – P7279TP-SP
FLEXIBLE Multi-Conductor Power Cable Type P

600V/1000V flexible multi-conductor power cable type P – P7279TP-SP

Voltage

600/1000V

Insulation

XLPO - Cross-Linked Polyolefin

Sizes

16 AWG - 777 MCM

Jacket

XLCP - Cross-Linked Chlorosulfonated Polyethylene

Temp Dry/Wet

125°C

Share it
Approvals

ROUND SUBMERSIBLE FLEXIBLE MULTI-CONDUCTOR
POWER CABLE
TYPE P UNARMORED

Round cable designed for use in deep well submersible in fresh or salt water suitable for continuous submersion to 984’ and temporary power supply where grounded circuits are not required.  

Dual rated submersible Type W. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Grease resistant.

Extra flexible unarmored multi-conductor power cable. Applicable for offshore oil and gas drilling platforms, MODUs, ships and FPSOs, land-based oil and gas drilling rigs. Suitable for use in Class 1 Division 1 and Zone 1 environments. Mud and Oil resistant.

  • Meets NEK 606 mud oil resistance requirements including ester-based muds
  • Meets UL 2225 crush and impact requirements of Type MC-HL cables
  • Flexible stranding to facilitate ease of cable installation and termination
  • Temperature rated @ 125˚C for long life, higher ampacities and protection from thermal overloads
  • Meets cold bend test at -55˚C
  • Meets cold impact test at -40˚C

Conductor: 8 AWG thru 777 KCMIL soft annealed flexible stranded tinned coated copper.

Insulation: Irradiated Cross-Linked Polyolefin (XLPO)

Cable Code: Color coding of power conductors per IEEE 1580 Table 22.

Cable Core: Core binder tape when required. Cabled with fillers when required.

Options: Other color codes available upon request.

  • API-RP14F
  • CSA C22.2 No. 245 Type x110
  • IEE 1580 Type P
  • IEC 60092-3
  • NEK 606 for mud oil resistance
  • UL 1309 Type X110
  • UL Listed 110˚C Marine Shipboard Cable

Flame Test:

  • IEEE 383
  • IEEE 1202
  • IEC 60332-3-22 Cat. A (supersedes IEC 60332-3A)
  • CSA C22.2 No. 0.3 FT4

Approvals:
ABS
DNV
CSA
Lloyds Register
(UL)
ETL
IEC

Three Conductor