Scroll To Top

5000V SP power cable – P7311-SP

Home   »   5000V SP power cable – P7311-SP   »   5000V SP power cable – P7311-SP
P7311-SP SUBMERSIBLE PUMP POWER WIRE CABLE

5000V SP power cable – P7311-SP

Voltage

5000V

Insulation

EPR - Ethylene Propylene Rubber

Sizes

8 AWG - 750 MCM

Jacket

XLPE - Cross-Linked Polyethlene

Temp Dry/Wet

90°C Dry, 75°C

Share it
Approvals

Round Shielded 3C with Ground XLPE/PVC

SUBMERSIBLE PUMP
POWER CABLE
5kV MV – 90°C SHIELDED
100% and 133%
5000 VOLT COPPER XLP

Shielded, Medium Voltage and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.

This specification covers the requirements for 5000 volts MV-90 in unshielded constructions. The cables UL listed for both wet and dry locations and is good for use in a submersible pump application.

Conductor: 3 Class B phase identified stranded copper conductors

Conductor Shield: extruded conductor shield

Insulation: heat and moisture resistant cross-linked polyethylene (type XLP).

Conductor: 3 Class B phase identified stranded copper conductors

Conductor Shield: extruded conductor shield

Insulation: heat and moisture resistant cross-linked polyethylene (100% and 133% insulation level).

Shield:

  • semi-conducting insulation shield
  • copper shield

Jacket: overall polyvinyl chloride (PVC)

Fillers: 3 conductors cabled together with suitable fillers

Ground: 1 bare copper ground

Armor: core covered with binder tape

Jacket: flame and sunlight resistant black PVC jacket. (Jacket available under armor and in other colors.

Color Code: K-2/other color codes available

Temperature: 90°C
Per ICEA S-66-524/NEMA WC-7

Underwriters’ Laboratories Approval: UL 1072