EPR/AIA/PVC Submersible Pump Cable
SUBMERSIBLE INTERLOCKED
ARMORED PUMP
CABLE SHIELDED
5KV TYPE MV-105
OR TYPE MC
3 CONDUCTORS WITH GROUND
Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
Conductor: Consist of uncoated soft, copper strands meeting the requirements of ASTM B3. Conductor shall be supplied as Class B compact per ASTM B496.
Conductor Shield: Consists of an extruded semiconducting layer.
Insulation: The insulation is ethylene-propylene rubber (EPR) extruded concentrically over the conductor to the wall thickness.
Insulation Shielding: Consist of a semi-conducting extruded compound and a 5 mil bare copper metallic tape shield overlapped a minimum of 20%.
Conductor Coding: Phase identification is provided by a printed color stripe on each insulated conductor (red, black, white).
Ground: One stranded bare copper ground in one of the outer cable interstices. The ground wire is sized per NEC/UL requirements.
Assembly: Conductors and ground wire are cabled together with a left hand lay and suitable fillers to make the cable round. A binder tape is applied.
Armor: Over the taped assembly there is an interlocking armor of either aluminum or galvanized steel.
Jacket: A protective sunlight and ozone resistant jacket of polyvinyl chloride (PVC) or chlorinated polyethylene (CPE) is extruded for a tight fit over the interlocked armor.