5KV SUBMERSIBLE INTERLOCKED ARMORED PUMP CABLE SHIELDED TYPE MV-90 OR TYPE MC 3 CONDUCTORS WITH GROUND

Conductors: Consist of uncoated soft, copper strands meeting the requirements of ASTM B3. Conductor shall be supplied as Class B compact per ASTM B496. Conductor Shield: Consists of an extruded semiconducting layer Insulation: Cross-linked polyethylene (XLP) extruded concentrically over the conductor to the wall thickness. (100% and 133% insulation level.) Insulation Shielding: Consist of a semi-conducting extruded compound and a 5 mil bare copper metallic tape shield overlapped a minimum of 20%. Conductor Coding: Phase identification is provided by a printed color stripe on each insulated conductor (red, black, white). Ground: One stranded bare copper ground in one of the outer cable interstices. Assembly: Conductors and ground wire are cabled together with a left hand lay and suitable fillers to make the cable round. A binder tape is applied. Armor: Over the taped assembly there is an interlocking armor of either aluminum or galvanized steel Jacket: A protective sunlight and ozone resistant jacket of polyvinyl chloride (PVC) or chlorinated polyethylene (CPE) is extruded for a tight fit over the interlocked armor. Temperature: 90˚C – Per ICEA S-66-534/ NEMA WC-7.

Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.

Download File 'P7308-SP'

No FAQs available at this time.