Single conductor submersible pump cable and motor lead RHH/RHW-2/RW90.
Dual rated submersible Type DLO. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.

Single conductor cable, designed for uses requiring flexible heavy duty power cables. For portable or fixed installations, leads for motors, generators, batteries, jumper cables or deep well submersible pump calbe. Dual rated Type DLO. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.

• UL listed RHH/RHW-2 600v & 2000v
• Rated 2kV DLO, 1kV RW90
• 90°C (dry), 90°C (wet)
• Ozone, sunlight, oils, grease, weather, chemical and abrasion resistant jacket and chemicals.
• Tray cable (TC) rated RW-90 CSA
• MSHA, VW-1, SUN RES, FOR CT USE for sizes 1/0AWG and larger and for black jacket
• Limited Smoke (LS) ST 1 in accordance with (UL) 1685

Nominal Voltage: RHH/RHW-2 600 and 2000V, R90 CSA, RW90 C9UL), 1kV, DLO 2kV.

Conductors: Annealed flexible stranded tin coated copper conductor in accordance with ASTM B-172, ASTM B-33.

Cable Reinforcement: Power conductors and cured rubber fillers cabled together. Single faced rubber filled binder tape applied over the assembly for mechanical protection.

Separator: A suitable tape separator between the conductor and insulation.

Insulation: Ethylene-propylene rubber (EPR) type EP, meeting UL, CSA and ICEA requirements for 90˚C

Jacket: A heavy duty, thermosetting CPE or CP compound in accordance with ICEA S-68-516 NEMA WC-8.

Color of Jacket: Black; Other colors available.

MSHA: P-7268080-01-MSHA (CPE)

UL: E193954 (CPE Jacket) RHW-2 90˚C Wet and Dry, VW-1, Sun Res, for 1/0 and larger ST-1, FT-4, IEEE1202, for CT use.

C(UL): E19354: “(TYPE) RW90 EP”; “1000V”; “FT1”

CSA: 1101209 (LL103932): “205591” or  “103932”; RW-90 90˚C; “FT1”; “FT4”; “-40˚C”; “OIL RES” (CPE) TC (Tray Cable) SR (Sun Res) 1/0 and larger.